- Katılım
- 23 Şubat 2006
- Mesajlar
- 1,162
- Tepkime puanı
- 4
- Puanları
- 0
Nagra2 emulation in titanium 1 card (irdeto emulation)
Note:
Under Titanium 1 & irdeto emulation, missing 1 byte in ecm receive to define correctly ident value
Example of ecm receive by card
[XX] 01 86 00 88 5F 53 71 1E 41 9B 88 9F 1D 6B 87 68 87 6B 3A 7A
A1 A9 AA AE CC 14 8D 7D FB 0D 80 6A FF 05 A3 2F E4 E7 FF 15
AB 38 31 F6 F4 87 3C 92 DE 11 93 5F 39 2E 75 7B D4 87 B7 44
E6 AD 24 C8 73 C1 F3 9A
[XX] is missed that's why we can't implement all ident in same time.
But possible to define ident used by default in card by using Tita1 Nagra2 Updater tool.
Cam tested:
Magic Module -> OS103/106
Joker Module -> OS103/106 (report to \Cam Firmwares Modified\TitaAll4-1(tita,fun) NAGRA2 Fix + R\Joker Cam Infos.txt)
XCam Module -> OS103/106 (very fast in Hispasat, slow under astra during zapping, same problem with opos)
Dragon Module -> OS106 ONLY
MR Module -> NOT OK -> Caids 1801 added but only ECM nagra1 receive (MR1060->1071)
MRV\MRB Module -> NOT OK -> NO ECM Receive at all
Idents on card:
4101 -> D+
4901 -> TV Cabo
C101 -> GloabeCast
0901 -> Bell ExpressVu
0101 -> Dish Network
Default ident in use on card: 4101 D+
Keys Update:
Change default ident will be used on card
Use Tita1 Nagra2 Updater.exe for updating keys
(folder \Tita1_Nagra2_Editor\Tita1_Nagra2\Editor\)
CAM FIRMWARES MODFIFIED INCLUDE
Magic Module - MultiFirmware311 NAGRA2 Fix
Magic Module - Penta111 NAGRA2 Fix.zip
Magic Module - Penta120 NAGRA2 Fix.zip
TitaAll4-1(tita,fun) NAGRA2 Fix + RL.zip
About Joker Cam Firmware Fix
Code:
Tita1 Nagra2 Updater
(C)MASARE Team - Saoud007
(C)FullDump TM
Materials:
- Titanium1 card
- Interface phoenix 3.58 MHZ
HOW TO:
Insert card in card progger
Select interface phoenix 3.58 MHZ
1/-Run Tita1 Nagra2 Updater
2/-Select Comport (option: autodetect com)
3/-Press "Read" Button
4/-Select Ident to edit -> "Select Ident" ComboBox
5/-Made your changes
6/-Define ident by default -> "Default Ident" ComboBox
7/-Press "Write" button
Tested with infinity usb pheonix & cas interface 3 (phoenix mode)
Note:
Under Titanium 1 & irdeto emulation, missing 1 byte in ecm receive to define correctly ident value
Example of ecm receive by card
[XX] 01 86 00 88 5F 53 71 1E 41 9B 88 9F 1D 6B 87 68 87 6B 3A 7A
A1 A9 AA AE CC 14 8D 7D FB 0D 80 6A FF 05 A3 2F E4 E7 FF 15
AB 38 31 F6 F4 87 3C 92 DE 11 93 5F 39 2E 75 7B D4 87 B7 44
E6 AD 24 C8 73 C1 F3 9A
[XX] is missed that's why we can't implement all ident in same time.
But possible to define ident used by default in card by using Tita1 Nagra2 Updater tool.
Cam tested:
Magic Module -> OS103/106
Joker Module -> OS103/106 (report to \Cam Firmwares Modified\TitaAll4-1(tita,fun) NAGRA2 Fix + R\Joker Cam Infos.txt)
XCam Module -> OS103/106 (very fast in Hispasat, slow under astra during zapping, same problem with opos)
Dragon Module -> OS106 ONLY
MR Module -> NOT OK -> Caids 1801 added but only ECM nagra1 receive (MR1060->1071)
MRV\MRB Module -> NOT OK -> NO ECM Receive at all
Idents on card:
4101 -> D+
4901 -> TV Cabo
C101 -> GloabeCast
0901 -> Bell ExpressVu
0101 -> Dish Network
Default ident in use on card: 4101 D+
Keys Update:
Change default ident will be used on card
Use Tita1 Nagra2 Updater.exe for updating keys
(folder \Tita1_Nagra2_Editor\Tita1_Nagra2\Editor\)
CAM FIRMWARES MODFIFIED INCLUDE
Magic Module - MultiFirmware311 NAGRA2 Fix
Magic Module - Penta111 NAGRA2 Fix.zip
Magic Module - Penta120 NAGRA2 Fix.zip
TitaAll4-1(tita,fun) NAGRA2 Fix + RL.zip
About Joker Cam Firmware Fix
Code:
Fixed support for Nagra2 Added Support for Original Card Red Ligth IMPORTANT: for TV Cabo you must select N-2 in cas menu for all others ALL is ok ========= Tested on: ========= Zeta Blue Rev 2.01 Ice Cam Normally will work in all others like Jokercam, SkyCrypt, Neotion.... Titanium OS: =========== OS 103/106 CAS Menu: ======== ALL VI SHL NZ MG I-A N-2 -> Nagra2 R-L -> Red Ligth Card (0626) B-A B-B B-C
Tita1 Nagra2 Updater
(C)MASARE Team - Saoud007
(C)FullDump TM
Materials:
- Titanium1 card
- Interface phoenix 3.58 MHZ
HOW TO:
Insert card in card progger
Select interface phoenix 3.58 MHZ
1/-Run Tita1 Nagra2 Updater
2/-Select Comport (option: autodetect com)
3/-Press "Read" Button
4/-Select Ident to edit -> "Select Ident" ComboBox
5/-Made your changes
6/-Define ident by default -> "Default Ident" ComboBox
7/-Press "Write" button
Tested with infinity usb pheonix & cas interface 3 (phoenix mode)